With the increasing international shift from prescriptive to performance-based regulations, a legislative call for the integration of predictive assessment tools in the design process has emerged. In relation to this, the requirements of Article 3 of the Directive on Energy Performance of Buildings (EPBD) were transposed into UK legislation with the introduction of the Building and Approved Inspectors (Amendment) Regulations 2006 (England and Wales) in April 2006. These introduced the ‘National Calculation Methodology’ (NCM), a unified compliance demonstration route for energy performance criteria specified in Approved Document Part L (Conservation of Fuel and Power), supported through the use of modelling-based building energy performance prediction (BEPP) tools accredited for the purposes of implementing associated calculations. This thesis presents an assessment of adopting the methodology, utilising a mixed-method research design to investigate key parameters identified as measures by which to quantify the success of this approach. Firstly, the adaptive capability of the UK construction industry is assessed through the analysis of primary data collected from a longitudinal survey. Secondly the applicability of the methodology is analysed through in-depth interviews examining the role of key actors and the varying dynamics of implementation and enforcement. Finally, a comparative evaluation is carried out to assess the adequacy of accredited BEPP tools. The main findings outline the shortcomings of the adaptation strategy adopted by industry and the inconsistent implementation and enforcement strategies employed. The results of the comparative tool study in particular highlight three important issues; a large degree of predictive variability between key compliance benchmarks, the lack of consistency in granting approval (a pass/fail result) between tools and limitations in the scope of their applicability. The research concludes that although a number of positive aspects can be associated with the introduction of a modelling-based approach for compliance demonstration, due to the aforementioned issues, considerable efforts are still required to extend its usefulness as a credible legislative support tool for performance-based regulations.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:565053 |
| Date | January 2010 |
| Creators | Raslan, R. M. S. |
| Publisher | University College London (University of London) |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://discovery.ucl.ac.uk/134389/ |
Page generated in 0.0017 seconds