In recent years, there has been a significant amount of research into cellulose nanocrystals (CNCs). These materials are categorized as being between 5 and 10 nm wide and being 100-250 nm long. CNCs have several uses, but the most common is the reinforcement of polymer composites. Here I present 2 papers investigating CNC-based composites.
By using standard bleaching procedures, pure cellulose was isolated from pistachio shells. Sulfuric acid was used to isolate cellulose nanocrystals from the purified cellulose. The obtained crystals were investigated by scanning electron microscopy, transmission electron microscopy, and X-ray diffraction. The CNCs were also added to thermoplastic polyurethane (TPU) to observe the reinforcement effects by dynamic mechanical analysis. Pistachio shells offered a high yield source material for CNCs, with a high aspect ratio but a low crystallinity. They did offer significant reinforcement of the TPU, but less than the commercially available wood-based CNCs.
Wood-based CNCs were also mixed with TPU in structured composites to create a film which actuates when exposed to water. The method of actuation is based on the different amounts of absorption of water in the composite as opposed to the pure TPU. The actuation was modeled based on the absorption of water and the modulus of two components. Mechanical properties of the CNC/TPU composites were evaluated via dynamic mechanical analysis, and water absorption was measured gravimetricaly. The tests helped us to evaluate our model which we compared to the composites. / Master of Science / Composites are a category of materials where two or more materials are used together to enhance each of their strengths. Such materials are often used in airplanes, spacecraft, sporting equipment, and many high-end products. Cellulose nanocrystals (CNCs) have been research with the goal of improving the environmental sustainability and performance of composite materials. This newly utilized material is found in plants and some animals to provide them with their strength. Researches have already shown that CNCs can improve the performance of many materials while reducing their lifetime environmental impact. In order to increase the market for CNCs, we are looking at cost-reducing methods of producing them as well as finding exciting new uses for them once they are made.
Right now, most CNCs are isolated from wood or cotton, which already have existing markets. This thesis presents a method of using pistachio shells, which are a waste product in many parts of the world including the United States. By finding new sources of CNCs, we hope to add to the body of knowledge and reduce the price of CNC production.
This thesis also lays the groundwork for a material that changes shape when exposed to water. By integrating CNCs into only part of a polymer, when water is added, the part with the CNCs will increase in size, causing it to push on the polymer. Our hope is to create a new use for CNC composites to help to increase the market for them. We discuss potential methods and proofs of concept on how to create a 3D-printed part using CNCs and polyurethane.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/78902 |
| Date | 14 September 2017 |
| Creators | Marett, Josh Michael |
| Contributors | Materials Science and Engineering, Foster, Earl Johan, Aning, Alexander O., Bortner, Michael J. |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.002 seconds