This diploma thesis deals with matte coatings for optical 3D scanning. The aim of this thesis is to find a method of spraying the mixture of TiO2 and ethanol that would provide layer thickness beyond the measurable range of the 3D scanner. A spray gun allowing deposition of atomized mixture was design. The coatings created by this gun and by airbrush gun, which is commonly used for this purpose, were compared. The matting effect, thickness and the influence of used TiO2 particles were investigated in the coatings. The paper shows method of applying coatings that ensure sufficient matting of the surface for scanning purposes, and simultaneously have thicknesses that should not affect scanning results.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:382168 |
| Date | January 2018 |
| Creators | Hruboš, David |
| Contributors | Mendřický, Radomír, Koutecký, Tomáš |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0051 seconds