The submitted thesis deals with a study of composite materials and processing them using 3D printing technology. The experimental part of this thesis is focused on the production of test samples with the use of additive technology Fused Deposition Modeling and Continuous Filament Fabrication. The composite samples made of common onyx material, individually reinforced with continuous carbon fiber filaments, kevlar, or fiberglass, were made with Marforged Mark Two 3D printer. The other samples made of PETG PM and PETG CFjet materials were made with Original Prusa i3 MK2S 3D printer. For technological evaluation, a tensile test was performed on samples, following the norm EN ISO 527-2:2012. Based on results obtained from tensile testing, the properties of materials strength and usability are verified and compared. In this work, the production process is proposed, and technical-economic evaluation is made. In conclusion, achieved results and overall benefits of this work are summarised.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417454 |
Date | January 2020 |
Creators | Kašpárková, Kristýna |
Contributors | Zemčík, Oskar, Zouhar, Jan |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0013 seconds