In this thesis I describe the development of an apparatus for performing attosecond photoelectron measurements in condensed matter, and the completion of attosecond streaking measurements on metal films using the apparatus. A commercial Ti:sapphire chirped pulse amplification laser system was used to generate 28fs, 2.5mJ pulses with a central wavelength of 790nm and a 1kHz repetition rate. These pulses were post-compressed using a hollow fibre system. The resulting few-cycle pulses had sub-4fs duration, and 0.4mJ energy. Diagnostics performed on the hollow fibre system revealed ionisation induced carrier-envelope phase fluctuations at input pulse energies in excess of 1mJ. These fluctuations were avoided for attosecond experiments by careful choice of the experimental parameters. The few-cycle pulses were used to generate isolated attosecond pulses through high-harmonic generation, in an amplitude-gating scheme. An ultra-high vacuum compatible two-part extreme-ultraviolet multilayer mirror setup was developed for attosecond streaking measurements on surfaces. The base pressure in the experimental chamber is 3 x 10^-9 mbar. Attosecond streaking measurements were performed on amorphous WO3 and polycrystalline Au, without any prior surface cleaning. The results indicate the applicability of attosecond streaking to a very general class of solid state samples. In WO3 the 4f photoemission precedes the valence photoemission by 140 ± 190as. In gold, possible signatures of plasmon dynamics were detected.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:656617 |
| Date | January 2014 |
| Creators | Okell, William |
| Contributors | Tisch, John; Marangos, Jon |
| Publisher | Imperial College London |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/10044/1/24755 |
Page generated in 0.0024 seconds