This thesis describes the development of a pore network model and its application to the analysis of the underlying physical mechanisms governing gas flow behaviour in porous media. The main focus of the study is CO2 and CH4 injection for EOR and storage applications as well as the evolution of solution gas following depressurization of hydrocarbon-saturated porous media. The model incorporates algorithms that dynamically track interface movements during both steady and unsteady-state flow under the coupled influence of capillary, gravity, and viscous forces. The model has been validated against laboratory experiments and the roles played by key system parameters have been identified. For injection processes, simulation results show that gravity-driven regimes fall into two broad categories of quasi-stable and migratory regimes, depending on the governing Bond number. The transition from non-dispersive to dispersive migratory flow was found to be largely independent of injection rate but a strong function of pore size distribution variance and system connectivity. CO2 and CH4 regimes in brine were found to exhibit striking similarities, suggesting that CH4-brine relative permeability curves could be used to accurately parameterize simulation models of CO2 storage in aquifers. Decreasing the interfacial tension was found to dampen viscous fingering but exacerbates gravity override which suggests that standard laboratory methods for analysing CO2 EOR processes are likely to overestimate displacement efficiency. Other sensitivity studies highlight the pore to core scale variables that control caprock sealing mechanisms, and residual and solubility trapping during CO2 injection for storage, and their implications at the reservoir scale. For depressurization, simulations performed on a pore network anchored to measured petrophysical properties of a 0.23mD fractured chalk core from a North Sea reservoir show a very weak correlation between depletion rate and critical gas saturation, contrary to conventional belief. Depressurization oil recovery efficiency was found to increase with increase in initial water saturation but the presence of fractures caused the critical saturation to decrease by approximately 60%.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:695433 |
| Date | January 2015 |
| Creators | Bagudu, Usman |
| Publisher | Heriot-Watt University |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://hdl.handle.net/10399/2991 |
Page generated in 0.0089 seconds