Return to search

Estructuras eléctricas para la integración de un sistema de generación eólica a la red eléctrica

Wind power generation has become one of the most important energy sources. Currently, due to the advances achieved in power electronics and vertical-axis small wind-turbines, the urban integration of wind-energy has increased considerably. In this work, three three-phase rectifiers are proposed to inject the energy from a permanent magnet synchronous generator to a microgrid DC-bus. By means of sliding mode control these architectures are modeled as a three-phase Loss Free Resistor allowing the power factor correction in each phase and obtaining a modular and redundant implementation.
However, due to the cost of the microgrids implementation, a boost inverter is proposed to obtain the most basic configuration for grid-connection. Using the boost inverter a sinusoidal output waveform can be obtained for input voltages lower than mains voltage. Finally, the DC voltage and the DC-link capacitor can be adjusted in order to optimize the global efficiency. / Wind power generation has become one of the most important energy sources. Currently, due to the advances achieved in power electronics and vertical-axis small wind-turbines, the urban integration of wind-energy has increased considerably. In this work, three three-phase rectifiers are proposed to inject the energy from a permanent magnet synchronous generator to a microgrid DC-bus. By means of sliding mode control these architectures are modeled as a three-phase Loss Free Resistor allowing the power factor correction in each phase and obtaining a modular and redundant implementation.
However, due to the cost of the microgrids implementation, a boost inverter is proposed to obtain the most basic configuration for grid-connection. Using the boost inverter a sinusoidal output waveform can be obtained for input voltages lower than mains voltage. Finally, the DC voltage and the DC-link capacitor can be adjusted in order to optimize the global efficiency.

Identiferoai:union.ndltd.org:TDX_URV/oai:www.tdx.cat:10803/132857
Date05 December 2013
CreatorsBahamonde, Freddy Flores
ContributorsValderrama-Blavi, Hugo, Universitat Rovira i Virgili. Departament d'Enginyeria Electrònica, Elèctrica i Automàtica
PublisherUniversitat Rovira i Virgili
Source SetsUniversitat Rovira i Virgili
LanguageSpanish
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/doctoralThesis, info:eu-repo/semantics/publishedVersion
Format197 p., application/pdf
SourceTDX (Tesis Doctorals en Xarxa)
RightsADVERTIMENT. L'accés als continguts d'aquesta tesi doctoral i la seva utilització ha de respectar els drets de la persona autora. Pot ser utilitzada per a consulta o estudi personal, així com en activitats o materials d'investigació i docència en els termes establerts a l'art. 32 del Text Refós de la Llei de Propietat Intel·lectual (RDL 1/1996). Per altres utilitzacions es requereix l'autorització prèvia i expressa de la persona autora. En qualsevol cas, en la utilització dels seus continguts caldrà indicar de forma clara el nom i cognoms de la persona autora i el títol de la tesi doctoral. No s'autoritza la seva reproducció o altres formes d'explotació efectuades amb finalitats de lucre ni la seva comunicació pública des d'un lloc aliè al servei TDX. Tampoc s'autoritza la presentació del seu contingut en una finestra o marc aliè a TDX (framing). Aquesta reserva de drets afecta tant als continguts de la tesi com als seus resums i índexs., info:eu-repo/semantics/openAccess

Page generated in 0.0097 seconds