This study was initiated by the need to improve current techniques used in the design of pneumatic conveying systems. At present, the commonly used method to predict the pressure drop in a vertical pipeline in a pneumatic conveying system is to obtain the pressure gradient in a horizontal for the identical conveying conditions and double the pressure gradient in the horizontal pipeline to give the pressure gradient in the vertical pipeline. In addition, scaling for pipeline bore in vertical pipelines is simply undertaken by considering the change in cross-sectional area. This is another area where sufficient investigation has not been undertaken. Therefore, as part of remit of this research study into improving current design techniques, an investigation into the effect of pipeline bore in vertical conveying would also be undertaken. This thesis documents the systematic approach that was used in order to produce some usable models that may be used in improving the understanding and design of pneumatic conveying systems. The models produced were based on data obtained by testing a range of products in an industrial scale pneumatic conveying test facility. The experimental data that was obtained from the pneumatic conveying tests form the basis of the ensuing analysis. The basic experimental data, which is primarily in the form of pressure gradient data for pneumatic conveying in horizontal and vertical pipelines, is explained in detail, along with the subsequent analysis of the data.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:426478 |
| Date | January 2006 |
| Creators | Hettiaratchi, Kaushika |
| Publisher | University of Greenwich |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | http://gala.gre.ac.uk/6190/ |
Page generated in 0.002 seconds