Ultrasonics, that is mechanical waves with a frequency greater that 18 kHz. are employed in a number of diverse and distinctive industries. One important niche occupied by ultrasound, and the focus of this thesis, is its application in ultrasonic cleaning systems whereby the rapid pulsing of mechanical waves at ultrasonic frequencies forms thousands of microscopic voids (or cavities) in the liquid. It is the implosions of these voids during the positive pressure phase of the wave that assists th removal of contaminants from the surface of an immersed load and is known as cavitation. A thorough literature review conducted as the foundation of this work uncovered a significant deficit in knowledge regarding the positions of cavitating fields within ultrasonic vessels. Further to this, the effects on the cavitating field of a number of industrially relevant parameters, such as transducer placement. the introduction of baskets and cleaning loads to the liquid and variations in the level of the cavitating medium, were found to be deficient within both academic and industrial knowledge base. The outcomes of the literature review clearly indicated that it was evident that the development of a "toolset" capable of modelling the bulk cavitating fields within ultrasonic vessels would not only sustain the strong industrial relevance of the programme of work, but would also add significantly to extant knowledge concerning the design and production of commercial ultrasonic vessels. This work describes the development of such a toolset, detailing the mathematical modelling behind the simulation system and the logical progression of the work, from basic 2D models used for rapid prototyping to full 3D models used to simulate a wide variety of complex systems with parameters hitherto un-described within the literature. A variety of methods of quantifying the simulation outputs are reviewed and discussed during the thesis, leading to the logical selection of one qualitative and one quantitative indicator of cavitating fields. A comparison of the simulation outputs to the respective empirical data showed an excellent degree of con-elation, leading to a high level of confidence in the simulation toolset. Use of the verified model together with the developed design methodology was used to address the industrially relevant issues detailed in the literature review and this further promoted the contribution to knowledge presented in this work. As in any industrial design. pragmatic approximations were used in the production environment and this occasionally appeared to show discrepancies between the simulation outputs and the practical data obtained. Specific causes behind these differences are critically analysed. and along with further questions arising from such analysis. The outcomes formed the backbone of a future work proposal presented along with a comprehensive review and summary of the results and improved synthesis techniques.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:441219 |
| Date | January 2007 |
| Creators | Lewis, Jamie Peter |
| Publisher | University of South Wales |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | https://pure.southwales.ac.uk/en/studentthesis/three-dimensional-simulation-of-ultrasonic-cleaning-vessels-and-verification-of-results(57bd54ba-4140-4179-8a6a-7297f154cb40).html |
Page generated in 0.0019 seconds