This thesis deals with positional control of DC motor Icla D065 of company SIG Positec Automation GmbH with aid of CAN-Bus and CANopen protocol. Individual parts describe general principle and standards of CAN-Bus and international normalized higher-level protocol CANopen for systems control. For control this motor was used microcontroller PIC18F4685 from company Microchip and developmental environment MPLAB® IDE. With used C language was made program for MCU control communication with a motor by support of CANopen protocol and its motion control. The result of this thesis will be used in solution of research project Intelligent Systems in Automation.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229000 |
Date | January 2010 |
Creators | Janda, Petr |
Contributors | Holý, Miroslav, Matoušek, Radomil |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0011 seconds