PRŮŽA Štěpán: Welding of fuel filters. This project, worked out in within engineering studies, branch M2307 – 02 Manufacturing technology, submits suggestions for decreasing of scrap during production – mechanized welding of fuel filters made out of aluminum EN AW – Al 99,5 using WIG/TIG methods. The theory is focused on arc welding issue. Verification of possible influences on the weld joints was tested during following experiments: top cover misalignment against the body of the filter, top cover deformation, gas flow, welding parameters setup, welding area purity, mechanization propositions. Evaluations of experiments – recommendation for elimination and prevention of bad quality weld joints. Key words: Welding, aluminum EN AW – AL 99,5, WIG/TIG method, weld’s joints defects, experiment, evaluation.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:228068 |
Date | January 2008 |
Creators | Průža, Štěpán |
Contributors | Suchánková, Ivana, Kubíček, Jaroslav |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0017 seconds