This thesis describes the design and construction of an instrument for comparison of x-ray doses at two different points in an x-ray field. Essentially, it consists of two ionization chambers each fed into a very stable, linear, d.c. amplifier. The outputs of the d.c. amplifiers are coupled in such a way that a fraction of the output of one amplifier is balanced against the total output of the other in a ratio circuit. The scale of the ratio circuit may be set to read directly the dose at any point as a percentage of the dose at an arbitrarily chosen reference point. This percentage is independent of fluctuations of the x-ray intensity with time.
The instrument is battery-operated, light in weight and therefore easily portable. The principal use of the instrument is for the comparison of x-ray doses at different points in a tissue-equivalent medium — information required for dose estimates in radiotherapy. The accuracy of the instrument is better than one half percent of the maximum dose in the x-ray field. The instrument can be modified for automatic plotting of "isodose curves". / Science, Faculty of / Physics and Astronomy, Department of / Graduate
Identifer | oai:union.ndltd.org:UBC/oai:circle.library.ubc.ca:2429/40355 |
Date | January 1956 |
Creators | Mibus, Sidney Albert |
Publisher | University of British Columbia |
Source Sets | University of British Columbia |
Language | English |
Detected Language | English |
Type | Text, Thesis/Dissertation |
Rights | For non-commercial purposes only, such as research, private study and education. Additional conditions apply, see Terms of Use https://open.library.ubc.ca/terms_of_use. |
Page generated in 0.0202 seconds