The interest in superhydrophobic coatings have increased exponentially in the recentdecades due to their potential and versatility in their applications. The use forsuperhydrophobic surfaces range from water repellent fabric, to self cleaning surfacesand numerous applications in industry. In this project the durability of 6 differentsuperhydrophobic coatings have been examined. The durability was tested bydropping sand on the surfaces from a set hight of 10 cm and a flow of 40 g/min. Thesurfaces were mounted on a 45° angle. The surfaces were abraded for 30 seconds ata time and the static, receding, and advancing contact angles along with the roll-ofangle was measured. Five of the surfaces were built up with nano particles and onewas sand blasted and anodized to create a superhydrophobic structure. The surfacesthat withstood the most abrasion was the surface that had been calcined to improveadhesion and the surface that had been sand blasted and anodized. Measurementsshowed that the roll-off angle and the receding contact angle were the two bestindicators of the deterioration of a surface, while the static contact angle and theadvancing contact angle varied little with abrasion. The project was done at thecompany Technical Research Institute of Sweden (SP) at their chemistry, surfaces andmaterials department in Stockholm. All coatings and equipment was supplied by SP.
Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:uu-300164 |
Date | January 2016 |
Creators | Holmberg, Max, Harlin, Hugo |
Source Sets | DiVA Archive at Upsalla University |
Language | English |
Detected Language | English |
Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
Format | application/pdf |
Rights | info:eu-repo/semantics/openAccess |
Relation | TVE ; 16064 juni |
Page generated in 0.2538 seconds