Electromagnetic based energy harvesting systems such as Variable reluctance energy harvesting systems (VREH) have shown to be an effective way of extracting the energy of rotating parts. The transducer can provide enough power to run an electronic sensing system, but the problem arises in finding an efficient way of rectifying that power to generate a stable energy supply to run a system, which this report will investigate. Active and passive voltage doublers have proven to be a suitable candidate in solving this issue due to the simplicity and the small footprint. This thesis will aim to compare active and passive voltage doublers under various scenarios in order to understand under which circumstances are active or passive voltage doublers to be preferred. From the conducted experimental measurements, this thesis concluded that active voltage doublers are recommended during high RPMs (>10 RPM) while passive voltage doublers (especially fullwave voltage doubler) is recommended at lower RPMs. Quality of power also plays a significant role in this study. Therefore, measurements have also been done for ripple and rise time. From the measurements, this thesis can conclude that the overall power quality was the best in Full-wave voltage doublers, while Active-voltage doublers had lower ripple than FWVDs at higher current loads.
| Identifer | oai:union.ndltd.org:UPSALLA1/oai:DiVA.org:miun-39600 |
| Date | January 2020 |
| Creators | Hamed, Ibrahim |
| Publisher | Mittuniversitetet, Institutionen för elektronikkonstruktion |
| Source Sets | DiVA Archive at Upsalla University |
| Language | English |
| Detected Language | English |
| Type | Student thesis, info:eu-repo/semantics/bachelorThesis, text |
| Format | application/pdf |
| Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0025 seconds