Return to search

Scaling Opportunities for Bulk Accumulation and Inversion MOSFETs for Gigascale Integration

The objective of this research is to comprehensively compare bulk accumulation and inversion MOSFETs, and find application areas where each is superior.Short channel effect (SCE) models for accumulation and inversion MOSFETs
are derived that accurately predict threshold voltage, subthreshold swing, and subthreshold current. A source/drain junction depth dependent characteristic length is derived that can be used to rapidly assess the impact of junction depth scaling on minimum channel length. A fast circuit simulation methodology is developed that uses physically based I-V models to simulate inversion and accumulation MOSFET inverter chains, and is found to be accurate over a wide range of supply voltages. The simulation methodology can be used
for rapid technology optimization, and performance prediction. Design guidelines are proposed for accumulation MOSFET design; the guidelines result in a low process sensitivity, low SCE, and a
subthreshold current less than the allowable limit. The relative performance advantage of accumulation/inversion MOSFETs is gate-technology dependent. In critical comparisons, on-current is evaluated by means of a full band Monte Carlo device simulation. Gate-leakage, and band-to-band tunneling leakage at the drain-substrate region are included in the performance analysis. For mid-bandgap metal gate, accumulation MOSFETs perform better than inversion MOSFETs for hi-performance (HiP) and low-operating power (LOP) applications. For tunable metal gate technology, inversion MOSFETs always perform better than accumulation MOSFETs. For dual poly technology, accumulation MOSFETs perform better than inversion MOSFETs for low standby power (LSTP) applications. A comprehensive scaling analysis has been performed on accumulation and inversion MOSFETs using both SCE models and 2-D simulations. Results show that accumulation MOSFETs can scale better than inversion MOSFETs for mid-bandgap metal gate HiP, and LOP applications; and poly gate LSTP applications.

Identiferoai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/5259
Date20 February 2004
CreatorsMurali, Raghunath
PublisherGeorgia Institute of Technology
Source SetsGeorgia Tech Electronic Thesis and Dissertation Archive
Languageen_US
Detected LanguageEnglish
TypeDissertation
Format951529 bytes, application/pdf

Page generated in 0.002 seconds