The aim of the doctoral thesis is the problem of the primary calibration of acoustic emission sensor. In the introductory chapters, there are the results from the study of literature in field of AE and primary calibration of AE sensor summarized. The practical part of the thesis is aimed on realization of the primary calibration of AE sensors by different methods. The standardized methods of step function calibration and reciprocity calibration were practically realized as a part of the research on the same aparature. The method of reciprocity calibration with wideband excitation was practically realized too. The comparison between results from each used method was realized and the influences of the different sources of uncertainty and the different configuration of the calibration aparature on the step function calibration and the reciprocity calibration were determined. The uncertainties were determined for each realized methods. The recommendations for the calibration by the different methods on the available calibration aparature were presented. All the proceses of the reciprocity primary calibration was automated by the programmed software and the channel switcher. The UT 1000 (s.n. 169) by Physical Acoustic Corporation was used as the calibrated sensor for the comparison of the results of the calibrations.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:233472 |
Date | January 2009 |
Creators | Keprt, Jiří |
Contributors | Mazal, Pavel, Hájek, Karel, Beneš, Petr |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/doctoralThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0021 seconds