The purpose of this study was to investigate the relationships between the arm joint angle at contact-release with peak velocity in experienced cerebral palsied athletes during wheelchair propulsion. The subjects (n = 5) exercised for a few minutes to familiarize themselves with the roller set up. After practice, each subject was asked to push the wheelchair as fast as possible up to 10 seconds. A tach-generator was attached to the core of the roller and interfaced to a computer via an eight bit A/D converter. The sampling rate of the roller speed was 200Hz. One video camera operating at 30 frames per second, and posisioned 7 m from the roller side was used. The data were analyzed for shoulder, elbow, and wrist angles with the Peak Performance program in I.B.M. compatible computer. Subjects' peak velocities were 8.85, 4.49, 4.19, 3.66, and 4.09 m/s, and the mean percent of contact and release times were 32.8% vs 67.2%. Shoulder, elbow, and wrist contact angles were not statisticaly in this study. Results indicate that contact-release angle on hand-handrim was effected for peak velocity. Also there was no significantrelationship between speed and cycle time.Key WordsRacing wheelchair, cerebral palsy, Peak velocity, Propulsion, Joint angle. / School of Physical Education
| Identifer | oai:union.ndltd.org:BSU/oai:cardinalscholar.bsu.edu:handle/184310 |
| Date | January 1992 |
| Creators | Moon, Jungun |
| Contributors | Ball State University. School of Physical Education., Gehlsen, Gale M. |
| Source Sets | Ball State University |
| Detected Language | English |
| Format | viii, 61 leaves : ill. ; 28 cm. |
| Source | Virtual Press |
Page generated in 0.0013 seconds