ITC/USA 2005 Conference Proceedings / The Forty-First Annual International Telemetering Conference and Technical Exhibition / October 24-27, 2005 / Riviera Hotel & Convention Center, Las Vegas, Nevada / There are increasing demands, particularly from government agencies, to perform uncertainty analysis in order to assign accuracy bounds to telemetered data from environmental measuring transducers (pressure, acceleration, force, strain, temperature, etc.). Several requirements must be fulfilled before measurement uncertainty analysis is justified. These requirements include good measurement system design practices such as adequate low- and high-frequency response and data-sampling rates, appropriate anti-aliasing filter selection^(1), proper grounding and shielding, and many more. In addition, there are applications (e.g., flight test) in which the environment of the transducer varies with time and/or location. In these applications, it is a requisite that data-validation be performed to establish that an individual transducer responds only to the environmental stimulus that it is intended to measure. Without this validation component designed into the telemetry system, assigned accuracy bounds can be totally meaningless. This paper presents examples and describes techniques for data validation of signals from environmental measuring transducers.
| Identifer | oai:union.ndltd.org:arizona.edu/oai:arizona.openrepository.com:10150/605041 |
| Date | 10 1900 |
| Creators | Walter, Patrick L. |
| Contributors | PCB Piezotronics, Texas Christian University |
| Publisher | International Foundation for Telemetering |
| Source Sets | University of Arizona |
| Language | en_US |
| Detected Language | English |
| Type | text, Proceedings |
| Rights | Copyright © International Foundation for Telemetering |
| Relation | http://www.telemetry.org/ |
Page generated in 0.0043 seconds