The use of minocycline for the treatment of a broad range of systemic infections and for severe acne has been associated with vestibular side effects. The severity of side effects may lead to poor adherence to therapy by patients. The use of sustained release formulations of minocycline that display slow dissolution of minocycline following administration may be beneficial in reducing the incidence and severity of side effects. Therefore, sustained release capsule dosage forms containing 100 mg minocycline (base) were manufactured and assessed for use as sustained release oral dosage forms of minocycline. Minocycline sustained release capsules were manufactured based on matrix technologies using hydroxypropylmethyl cellulose (HPMC) and Compritol® as release retarding polymers. The rate and extent of minocycline release from the capsules was evaluated using USP Apparatus 1 and samples were analysed using a validated High Performance Liquid Chromatographic (HPLC) method with ultraviolet (UV) detection. Differences in the rate and extent of minocycline release from formulations manufactured using HPMC or Compritol® were influenced by the concentration of polymer used in the formulations. The rate and extent of minocycline release was faster and greater when low concentrations of polymer were used in formulations. The effect of different excipients on the release pattern(s) of minocycline and particularly their potential to optimise minocycline release from experimental formulations was investigated. The use of diluents such as lactose and microcrystalline cellulose (MCC) revealed that lactose facilitated minocycline release when HPMC was used as the polymer matrix. In contrast, the use of lactose as diluent resulted in slower release of minocycline from Compritol® based formulations. The addition of sodium starch glycolate to HPMC based formulations resulted in slower release of minocycline than when no sodium starch glycolate was used. Compritol® based formulations were observed to release minocycline faster following addition of sodium starch glycolate and Poloxamer 188 to experimental formulations. In vitro dissolution profiles were compared to a target or reference profile using the difference and similarity factors, ƒ1 and ƒ2 , and a one way analysis of variance (ANOVA). In addition, the mechanism of minocycline release was elucidated following fitting of dissolution data to the Korsmeyer-Peppas, Higuchi and Zero order models. Minocycline release kinetics were best described by the Korsmeyer-Peppas model and the values of the release exponent, n (italics), revealed that drug release was a result of the combined effects of minocycline diffusion through matrices and erosion of the matrices. These in vitro dissolution profiles were better fit to the Higuchi model than to the Zero order model. Two formulations that displayed a fit to the Zero order model were identified for further studies as potential dosage forms for sustained release minocycline.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:rhodes/vital:3854 |
| Date | January 2010 |
| Creators | Sachikonye, Tinotenda Chipo Victoria |
| Publisher | Rhodes University, Faculty of Pharmacy, Pharmacy |
| Source Sets | South African National ETD Portal |
| Language | English |
| Detected Language | English |
| Type | Thesis, Masters, MSc |
| Format | 198 p., pdf |
| Rights | Sachikonye, Tinotenda Chipo Victoria |
Page generated in 0.0023 seconds