Return to search

In situ sensing to enable the 2010 thermodynamic equation of seawater

The thermodynamic equation of seawater - 2010 (TEOS-10) is hampered by the inability to measure absolute salinity or density in situ. No new advances for in situ salinity or density measurement have taken place since the adoption of the practical salinity scale in 1978. In this thesis three possible technologies for in situ measurements are developed and assessed: phased conductivity, an in situ density sensor and sound speed sensors. Of these, only sound speed sensors showed the potential for an in situ TEOS-10 measurement solution. To be implemented, sensor response times need to be matched and the sound speed sensor accuracy must be improved. Sound speed sensor accuracy is primarily limited by the calibration reference, pure water. Test results indicate the TEOS-10 sound speed coefficients may also need to be improved. A calibration system to improve sound speed sensor accuracy and verify the TEOS-10 coefficients is discussed. / Graduate / 0415 / 0986 / TDakin@UVic.ca

Identiferoai:union.ndltd.org:uvic.ca/oai:dspace.library.uvic.ca:1828/7713
Date03 January 2017
CreatorsDakin, Del Thomas
ContributorsVagle, Svein, Dosso, Stanley Edward
Source SetsUniversity of Victoria
LanguageEnglish, English
Detected LanguageEnglish
TypeThesis
RightsAvailable to the World Wide Web, http://creativecommons.org/licenses/by-nd/2.5/ca/

Page generated in 0.0018 seconds