Diploma thesis is focused on modification and characterization of polypropylene (PP) products surfaces by the chemical way. In theoretical part of thesis are summarized the current knowledge of this topic including characterization methods. Polypropylene surfaces were modified by acrylic monomers (acrylic acid, acrylic acid with 20 mol% content of sodium acrylate and acryl amide). Modified surfaces were characterized by infrared spectroscopy with ATR technique. The comparative parameter was carbonyl index determined from absorption peaks of functional methyl groups (2950 cm-1 ) and functional carbonyl groups (1700-1750 cm-1) of FTIR-ATR spectra. Determination of effect of initiator concentration on the modification process was done for acetophenone and benzophenone. There were determined the time dependence of carbonyl index for time from 0 to 600 s of mentioned monomers. In the same condition were modified test specimens designed for preparation of adhesive joints. Joints were bonded by cyanoacrylate adhesive that provide reaction with surface of polyacrylic acid. There were founded conditions of modification that provided strength of adhesive joints higher than strength of original PP. There were identified changes of surface roughness by using of confocal microscopy.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:217038 |
| Date | January 2014 |
| Creators | Pospíšek, Marek |
| Contributors | Petrůj, Jaroslav, Kučera, František |
| Publisher | Vysoké učení technické v Brně. Fakulta chemická |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0015 seconds