Return to search

The roof wing opening system of the UAE pavilion at EXPO 2020

The UAE Pavilion will be a major attraction at Expo 2020 in Dubai. The roof of the building consists of 28 operable wings made of carbon and glass fiber, having masses ranging from 5 to 18 tons and total lengths in the range of 30 to 65 m that have to be actuated by a dedicated mechanism. In this paper we present the turn-key project for the design, manufacturing, installation, test and commissioning of the Roof Wing Opening System, which represents a unique system world-wide for operating the wings. It consists of one Hydraulic Power Unit with approximately 1 MW of installed power, 2 km of piping working at the nominal pressure of 210 bar, 46 hydraulic cylinders with 1.5 tons of mass each and the complete automation and control subsystem that includes 9 separate PLCs, dedicated software, 2.000 sensors and control points, and over 20 km of harness. One major challenge is the control of the wings. Part of them, due to their huge dimensions and masses, are actuated using two or three hydraulic cylinders that have to be properly synchronized during the movement, preventing unwanted displacements in order to avoid stresses on the wing mechanical structure and ultimately permanent damages. Due to the nature of the project, a final validation of the control algorithms can be done only at system level during the commissioning phase. Therefore, particular care has to be devoted to the verification strategy, anticipating the behavior of the system in the early validation stages and following a V-model approach, in order to identify critical situations and reduce the overall risk. After a brief system description, we will explain how the verification has been approached by using system level simulations and dedicated testing activities on specific subsystems. In particular, we will detail the verification of the control algorithms that has been performed on a dedicated Hardware-Inthe- Loop system first, followed then by dedicated tests on a reduced wing mock-up, allowing the study of the system behavior under the most critical conditions. These include the application of external forces with specified profiles. Finally, we will provide the actual status of the system installation, testing and commissioning activities that have been running in Dubai since January 2019.

Identiferoai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:71228
Date26 June 2020
CreatorsLeutenegger, Paolo, Vergano, Carlo, Herzinger, Rainer, Weber, Jürgen, Bassetto, Nicola, Belluschi, Fabio, Cardani, Riccardo, Costin, Ina, Codari, Costanzo, Ferla, Stefano, Forti, Giovanni, Köhler, Simon, Maddalon, Roberto, Pari, Gino, Panev, Daniel, Pavanetto, Michele, Poli, Christian, Ripamonti, Massimo, Rossignoli, Alessandro, Trau, Matteo, Uhlmann, Jonas, Zaltieri, Renzo
ContributorsDresdner Verein zur Förderung der Fluidtechnik e. V. Dresden
PublisherTechnische Universität Dresden
Source SetsHochschulschriftenserver (HSSS) der SLUB Dresden
LanguageEnglish
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/publishedVersion, doc-type:conferenceObject, info:eu-repo/semantics/conferenceObject, doc-type:Text
Rightsinfo:eu-repo/semantics/openAccess
Relation10.25368/2020.8, urn:nbn:de:bsz:14-qucosa2-709188, qucosa:70918

Page generated in 0.0019 seconds