Additive Manufacture (AM) is a novel manufacturing method; it is a process of forming components by adding materials. Owing to material saving and manufacturing cost saving, more and more research has been focused on metal AM technologies. WAAM is one AM technology, using arc as the heat sources and wire as the material to create parts with weld beads on a layer-by-layer basis. The process can produce components in a wide range of materials, including aluminum, titanium and steel. High deposition rate, material saving and elimination of tooling cost are critical characteristics of the process.
Cost estimation is important for all companies. The estimated results can be used as a datum to create a quote for customers or evaluate a quote from suppliers, an important consideration for the application of WAAM is its cost effectiveness compared with traditional manufacture methods. The aim of this research is to find a way to develop a cost estimating method capable of providing manufacturing cost comparison of WAAM with CNC. A cost estimation model for CNC machining has been developed. A process planning approach for WAAM was also defined as part of this research. An Excel calculation spreadsheet was also built and it can be easily used to estimate and compare manufacture cost of WAAM with CNC.
Using the method developed in this research, the cost driver analysis of WAAM has been made. The result shows that reduced material cost is the biggest cost driver in WAAM. The cost comparison of WAAM and CNC also has been made and the results show that with the increase of buy-to-fly ratio WAAM is more economical than CNC machining.
| Identifer | oai:union.ndltd.org:CRANFIELD1/oai:dspace.lib.cranfield.ac.uk:1826/7856 |
| Date | 09 1900 |
| Creators | Zhai, Yun |
| Contributors | Lockett, Helen |
| Publisher | Cranfield University |
| Source Sets | CRANFIELD1 |
| Language | English |
| Detected Language | English |
| Type | Thesis or dissertation, Masters, MSc by Research |
| Rights | © Cranfield University 2012. All rights reserved. No part of this publication may be reproduced without the written permission of the copyright owner. |
Page generated in 0.0015 seconds