Return to search

Development and use of a miniature ultrasonic pulser receiver

The field of restorative dentistry and the problem of ultrasonic airframe corrosion in aerospace are introduced as motivation for the construction of a miniature ultrasonic pulser/receiver. / A broadly applicable ultrasonic pulser and receiver system is developed. Two pulsers, a 5V square and a 100V spike, and a 52dB amplifier with a 57MHz 6dB bandwidth were constructed as a result. These battery powered devices are tailored for compatibility with a custom built wireless data transmission system, also driven by the same voltage. It is demonstrated that the new pulser/receiver is comparable to the commercial system in performance in certain areas. / The new pulsers/receiver and a commercial one are used in this work. The data is acquired and analyzed using LabView and Matlab. It is shown that the ultrasonic technique can be used to follow the reaction in time as well as to gauge the cure of dental composites. The current work in ultrasonic airframe corrosion detection is furthered and the wireless system's functionality is affirmed.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.112581
Date January 2008
CreatorsNguyen, San Boi.
PublisherMcGill University
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Formatapplication/pdf
CoverageMaster of Engineering (Department of Electrical and Computer Engineering.)
RightsAll items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated.
Relationalephsysno: 002763010, proquestno: AAIMR51472, Theses scanned by UMI/ProQuest.

Page generated in 0.0024 seconds