In this thesis, optimal placement of adhesively bonded piezoelectric patches on laminated plates and the determination of geometry of the bonding area to maximize actuation effect are studied. A new finite element model, in which each layer is considered to be a separate plate, is developed. The adhesive layer is modeled as a distributed spring system. In this way, relative transverse normal and shear motion of the layers are allowed. Effect of delamination on the adhesive layer stresses is also studied and investigated through several case studies. Optimization problems, having single and multiple objectives, are investigated for both actuator placement and selective bonding examples. In these case studies, 2D and 3D Pareto fronts are also obtained. & / #8216 / Hide and Seek Simulated Annealing& / #8217 / method is adapted for discrete problems and used as the
optimization technique for single-objective problems. Finally, Multiple Cooling Multi Objective Simulated Annealing optimization algorithm is adapted and used in multi-objective optimization case studies.
Identifer | oai:union.ndltd.org:METU/oai:etd.lib.metu.edu.tr:http://etd.lib.metu.edu.tr/upload/12606340/index.pdf |
Date | 01 July 2005 |
Creators | Erturk, Cevher Levent |
Contributors | Tekinalp, Ozan |
Publisher | METU |
Source Sets | Middle East Technical Univ. |
Language | English |
Detected Language | English |
Type | Ph.D. Thesis |
Format | text/pdf |
Rights | To liberate the content for public access |
Page generated in 0.0022 seconds