The NASA Langley Research Center hypersonic wind tunnels serve a vital role in the field of hypersonics in both helping validate CFD predictions and producing experimental results. These tunnels have been heavily utilized for decades by numerous planetary missions, such as MSL and Orion, commercial and academic partnerships, such as Sierra Space and the University of Maryland, and flight projects such as Artemis and LOFTID. The data acquisition method used in these tunnels is thermography, primarily phosphor and infrared. Image data are not collected during model injection, resulting in a data gap in the time-history of temperature. Historically, an approximate method has been used to obtain heating data with the data gap, but a new, higher-fidelity method has been developed that patches the data gap and performs integral heat transfer analysis on the temperature data, directly solving the heat equation and avoiding unnecessary assumptions. This method has been shown to model the surface heating much more accurately, agree with computational predictions better than the current method, and be an overall more robust method that collapses to a constant film coefficient value much more quickly. The culmination of these aspects results in a method that is a significant improvement over the approximate method and increases the fidelity of the heating results obtained from the NASA Langley Research Center hypersonic wind tunnels. / Master of Science / A new heat transfer analysis method that reduces image data taken of wind tunnel models in the NASA Langley Research Center hypersonic wind tunnels has been developed as a higher-fidelity successor to the existing approximate method. This new method patches the data gap that occurs during injection due to the fact that no images are taken of the model until it reaches the centerline of the tunnel. Then, this method performs integral heat transfer analysis on the image temperature data, directly solving the heat equation and avoiding unnecessary assumptions. This method has been shown to model the surface heating better, agree with computational predictions better, and be a more robust method that obtains a film coefficient value more quickly. This method is shown to be a significant improvement over the approximate method.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/116085 |
| Date | 22 August 2023 |
| Creators | Cheatwood, Jonathan Steven |
| Contributors | Aerospace and Ocean Engineering, Black, Jonathan T., Hollis, Brian R., Schroeder, Kevin Kent, Adams, Colin |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0022 seconds