Return to search

An optimisation approach to improve the throughput in wireless mesh networks through network coding / van der Merwe C.

In this study, the effect of implementing Network Coding on the aggregated throughput in Wireless
Mesh Networks, was examined. Wireless Mesh Networks (WMNs) are multiple hop wireless networks,
where routing through any node is possible. The implication of this characteristic, is that messages
flow across the points where it would have been terminated in conventional wireless networks. User
nodes in conventional wireless networks only transmit and receive messages from an Access Point
(AP), and discard any messages not intended for them.
The result is an increase in the volume of network traffic through the links of WMNs. Additionally,
the dense collection of multiple RF signals propagating through a shared wireless medium, contributes
to the situation where the links become saturated at levels below their capacity. The need exists to
examine methods that will improve the utilisation of the shared wireless medium in WMNs.
Network Coding is a coding and decoding technique at the network level of the OSI stack, aimed to
improve the boundaries of saturated links. The technique implies that the bandwidth is simultaneously
shared amongst separate message flows, by combining these flows at common intermediate nodes.
The number of transmissions needed to convey information through the network, is decreased by
Network Coding. The result is in an improvement of the aggregated throughput.
The research approach followed in this dissertation, includes the development of a model that
investigates the aggregated throughput performance of WMNs. The scenario of the model, followed a
typical example of indoors WMN implementations. Therefore, the physical environment representation
of the network elements, included an indoors log–distance path loss channel model, to account for the
different effects such as: power absorption through walls; and shadowing.
Network functionality in the model was represented through a network flow programming problem.
The problem was concerned with determining the optimal amount of flow represented through the
links of the WMN, subject to constraints pertaining to the link capacities and mass balance at each
node. The functional requirements of the model stated that multiple concurrent sessions were to
be represented. This condition implied that the network flow problem had to be a multi–commodity
network flow problem.
Additionally, the model requirements stated that each session of flow should remain on a single path.
This condition implied that the network flow problem had to be an integer programming problem.
Therefore, the network flow programming problem of the model was considered mathematically
equivalent to a multi–commodity integer programming problem. The complexity of multi–commodity
integer programming problems is NP–hard. A heuristic solving method, Simulated Annealing, was implemented to solve the goal function represented by the network flow programming problem of the model.
The findings from this research provide evidence that the implementation of Network Coding in
WMNs, nearly doubles the level of the calculated aggregated throughput values. The magnitude of
this throughput increase, can be further improved by additional manipulation of the network traffic
dispersion. This is achieved by utilising link–state methods, rather than distance vector methods, to
establish paths for the sessions of flow, present in the WMNs. / Thesis (M.Ing. (Computer and Electronical Engineering))--North-West University, Potchefstroom Campus, 2012.

Identiferoai:union.ndltd.org:NWUBOLOKA1/oai:dspace.nwu.ac.za:10394/7302
Date January 2011
CreatorsVan der Merwe, Corna
PublisherNorth-West University
Source SetsNorth-West University
Detected LanguageEnglish
TypeThesis

Page generated in 0.0028 seconds