Return to search

Analysis of bubble generating devices in a deinking column

Column flotation as a concept was introduced approximately 90 years ago at Inspiration Copper Co., Arizona, with the first successful installation occurring at Les Mines Gaspe, Quebec, in 1981. Column flotation has since been applied to many other industries including deinking of recycled paper. / The research is a comparison of industrial bubble generating devices in a pilot and laboratory column using water/Dowfroth and pulp sampled on-line from a local deinking plant. The pilot column tested combinations of 6, 4 and 2 stainless steel (ss) porous spargers, and filter cloth and jetting sparger; the lab column used a single ss porous sparger. Long term tests on the pilot column were also done to evaluate maintenance issues. / Trends from the water/Dowfroth tests were used to predict results using pulp. Six ss spargers outperformed the other spargers in all cases. The performance of the lab column sparger matched 4 spargers, with the filter cloth performing marginally better than the jetting sparger or 2 spargers. / Gas holdup (Eg) and bubble surface area flux (Sb) gave good correlation with ink removal with all spargers failing within a narrow range. Surface area flux is suggested over Eg unless bubble diameter or superficial gas velocity are indeterminable. Sb > 100 s-1 gave ink removals equal to the plant Voith cells. An Sb below 40 s-1 gave zero ink removal. The lab and pilot column followed slightly different trends which was attributed to column diameter (i.e., wall effects). / The ss and filter cloth spargers present long term maintenance issues due to plugging. The performance of the 6 ss spargers decreased more quickly than any other during the long term tests, attributed to lower air velocities per pore.

Identiferoai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.21310
Date January 1998
CreatorsLeichtle, Gunther F.
ContributorsFinch, J. A. (advisor)
PublisherMcGill University
Source SetsLibrary and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada
LanguageEnglish
Detected LanguageEnglish
TypeElectronic Thesis or Dissertation
Formatapplication/pdf
CoverageMaster of Engineering (Department of Mining and Metallurgical Engineering.)
RightsAll items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated.
Relationalephsysno: 001658607, proquestno: MQ50635, Theses scanned by UMI/ProQuest.

Page generated in 0.0018 seconds