The focus of this thesis is to develop and evaluate a cutback noise minimization process - also known as dynamic cutback optimization - that considers engine spool down during thrust cutback and is consistent with ICAO and FAR Part 36 noise certification procedures.
Simplified methods for flyover EPNL prediction used by propulsion designers assume instantaneous thrust reduction and do not take into account the spooling down of the engine during the cutback procedure. The thesis investigates if there is an additional noise benefit that can be gained by modeling the engine spool down behavior. This in turn would improve the margin between predicted EPNL and Stage 4 noise regulations.
Modeling dynamic cutback also impacts engine design during the preliminary and detailed design stages. Reduced noise levels due to cutback may be traded for lower engine fan diameter, which in turn reduces weight, fuel burn, and cost.
| Identifer | oai:union.ndltd.org:GATECH/oai:smartech.gatech.edu:1853/33812 |
| Date | 15 April 2010 |
| Creators | Jayaraman, Shankar |
| Publisher | Georgia Institute of Technology |
| Source Sets | Georgia Tech Electronic Thesis and Dissertation Archive |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.002 seconds