The purpose of this diploma thesis is comparing the quantity of porosity in die-cast aluminium casting with using simulation. The cast engine blocks were made by high pressure die-casting and a local squeeze casting (LSC) technology. There was also examined the relationship between porosity and mechanical properties of castings. There were evaluated and compared the results of my own measurements with data from previous students theses at the Faculty of Mechanical Engineering BUT. All data were tested by statistical tests. The comparison of simulation results and experimentally measured values was found a good programme-ability to simulate and estimate porosity.
| Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:229462 |
| Date | January 2011 |
| Creators | Morávková, Jitka |
| Contributors | Nová, Iva, Čech, Jaroslav |
| Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
| Source Sets | Czech ETDs |
| Language | Czech |
| Detected Language | English |
| Type | info:eu-repo/semantics/masterThesis |
| Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0024 seconds