Return to search

Applying alternative fuels in place of hydrogen to the jet ignition process

Hydrogen Assisted Jet Ignition (HAJI) is an advanced ignition process that allows ignition of ultra-lean mixtures in an otherwise standard gasoline fuelled spark ignition engine. Under typical operating conditions, a small amount of H2 (~ 2 % ofthe main fuel energy or roughly the equivalent of 1 g/km of H2) is injected just before ignition in the region of the spark plug. By locating the spark plug in a small prechamber (less than 1 % of the clearance volume) and by employing a H2 rich mixture, the content of the prechamber is plentiful in the active species that form radicals H and OH on decomposition and has a relatively high energy level compared to the lean main chamber contents. Thus, the vigorous jets of chemically active combustion products that issue through orifices, which connect to the main chamber, burn the main charge rapidly and with almost no combustion variability (less than 2% coefficient of variation in IMEP even at λ = 2.5). / The benefits from the low temperature combustion at λ = 2 and leaner are that almost zero NOx is formed and there is an improvement in thermal efficiency. Efficiency improvements are a result of the elimination of dissociation, such as CO2 to CO, which normally occurs at high temperatures, together with reduced throttling losses to maintain the same road power. It is even possible to run the engine in an entirely unthrottled mode, but at λ = 5. / Although only a small amount of H2 is required for the HAJI process, it is difficult to both refuel H2 and store it onboard. In order to overcome these obstacles, the viability of a variety of more convenient fuels was experimentally assessed based on criteria such as combustion stability, lean limit and emission levels. The prechamber fuels tested were liquefied petroleum gas (LPG), natural gas, reformed gasoline and carbon monoxide. Additionally, LPG was employed as the main fuel in conjunction with H2 or LPG in the prechamber. Furthermore, the effects of HAJI operation under sufficient exhaust gas recirculation to allow stoichiometric fuel-air supply, thus permitting three-way catalyst application were also examined. / In addition to experiments, prechamber and main chamber flame propagation modeling was completed to examine the effects of each prechamber fuel on the ignition of the main fuel, which consisted of either LPG or gasoline. The modeling and experimental results offered similar trends, with the modeling results giving insight into the physiochemical process by which main fuel combustion is initiated in the HAJI process. / Both the modeling and experimental results indicate that the level of ignition enhancement provided by HAJI is highly dependent on the generation of chemical species and not solely on the energy content of the prechamber fuel. Although H2 was found to be the most effective fuel, in a study of a very light load condition (70 kPa MAP) especially when running in the ultra-lean region, the alternative fuels were effective at running between λ = 2-2.5 with almost zero NOx formation. These lean limits are about twice the value possible with spark ignition (λ = 1.25) in this engine at similar load conditions. In addition, the LPG results are very encouraging as they offer the possibility of a HAJI like system where a commercially available fuel is used as both the main and prechamber fuel, while providing thermal efficiency improvements over stoichiometric operation and meeting current NOx emission standards.

Identiferoai:union.ndltd.org:ADTP/245583
Date January 2008
CreatorsToulson, E.
Source SetsAustraliasian Digital Theses Program
LanguageEnglish
Detected LanguageEnglish
RightsTerms and Conditions: Copyright in works deposited in the University of Melbourne Eprints Repository (UMER) is retained by the copyright owner. The work may not be altered without permission from the copyright owner. Readers may only, download, print, and save electronic copies of whole works for their own personal non-commercial use. Any use that exceeds these limits requires permission from the copyright owner. Attribution is essential when quoting or paraphrasing from these works., Open Access

Page generated in 0.0017 seconds