The thesis deals with the design of the experimental testing rig. Test rig is designed to measure NVH transmission parameters. First, basic knowledge of vibro-acoustic measurement is discussed. This is followed by an evaluation of the most commonly used power devices to derive real loads on measured gearboxes. In more detail, a back-to-back test rig is disassembled among other things. In the thesis are described two main components, which are composed of a connecting element and a test bench. Both components were optimized during the design due to their modal properties. Numerical modal analysis was performed in ANSYS Workbench software. The thesis also includes strength calculations performed using both numerical and analytical approaches. The indispensable result of the design work is the complete drawing documentation. Finally, measurements of vibrations and noise on the physically made connecting element assembly have been performed and subsequently evaluated.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:378013 |
Date | January 2018 |
Creators | Otipka, Václav |
Contributors | Řehák, Kamil, Prokop, Aleš |
Publisher | Vysoké učení technické v Brně. Fakulta strojního inženýrství |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.002 seconds