In this Master´s thesis will be performed an analysis of thermal properties of synchronous machines in the program Ansys Workbench on a simplified model of synchronous traction motor. In the first section will be performed thermal analysis without cooling followed by analysis of air flow and finally thermal analysis with cooling for fan speed 1500 min-1 and 3000 min-1. The second section will describe the principle, construction and losses on the synchronous machine. The third chapter will describe concepts such as heat, temperature, heat transfer, types of the heat transfer, specific heat capacity, emisivity and thermal conductivity. The fourth chapter will introduce the program Ansys Workbench, finite element method and Ansys CFX. In the fifth chapter will be described how to perform thermal analysis on the created model of motor. The sixth chapter will describe how to analyze the air flow of the created model of motor. The flow analysis will be performed for fan speed 1500 min-1 and 3000 min-1. In the seventh chapter will be compared the results of the air flow and pressure field in the motor model. In the eighth chapter will be performed a thermal analyzis on the created motor model with cooling for fan speed 1500 min-1 and 3000 min-1. The nineth chapter will compare the results of temperatures and heat fluxes obtained from the thermal analysis witnout cooling, with cooling for fan speed 1500 min-1 and 3000 min-1 for full losses, half losses of continous running, and full losses of interrupt running for 9000 seconds (2 hours 30 minutes).
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219717 |
Date | January 2012 |
Creators | Paszek, Michal |
Contributors | Hájek, Vítězslav, Janda, Marcel |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds