Return to search

CFD analýza tepelného zatížení trubkovnice / CFD analysis of thermal stress of a tubesheet

This diploma thesis focuses on the phenomena of multiphase flow in a steam generator as a one of probable causes of tubes and tubesheet weld cracking. In the first part of the work, a research was carried out focusing on the boiling and the phenomenon of two-phase flow in technical applications, its characteristics and properties. The thesis continuous with an overview of available numerical multiphase models in the ANSYS Fluent 2021 R1 and a research of previously published works focused on two-phase flow with the presence of boiling. The research is followed by a description of the particular boiler, which is part of the nitric acid production plant in the chemical company DUSLO, a.s., its operating conditions and a more detailed description of the issue that is being addressed in this thesis. The second part of the work continuous with a description of the computational model, including a description of the geometry of the model and used simplifications, the computational mesh and the description of boundary conditions. Important part is the description of calculation setting of steady-state and transient CFD simulations in ANSYS Fluent. Finally, the results of the two-phase flow calculation are presented and then discussed in the conclusions.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:443458
Date January 2021
CreatorsVince, Tomáš
ContributorsBabička Fialová, Dominika, Rebej, Miroslav
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageSlovak
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0018 seconds