This thesis is focused on electron microscopy which issue is discussed at the beginning of work. The main attention is dedicated to the Environmental electron microscope, especially the differentially pumped chamber, which the thesis deals with. There is a production of an experimental chamber for analysis of shock waves on going therefore main goal of this thesis was to analyze the flow pattern in this chamber. Using the Ansys Fluent program, simulations of the characteristic flow that arises from the pumping of the vacuum chambers namely the ultrasonic flow at low pressures on which the most suitable turbulent module was applied as well as the degree of discretization was performed. The final analysis of this flow pattern is primarily focused on the localization of the shock wave which experimental evidence is to be lodged by shadow optical method as a part of the new concept of the chamber. The basis for the simulation of the chamber was taken over by Dr. Danilatos, with which the results were compared.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:319633 |
Date | January 2017 |
Creators | Šimík, Marcel |
Contributors | Bílek, Michal, Maxa, Jiří |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0018 seconds