Thesis (MTech (Electrical Engineering))--Cape Peninsula University of Technology, 2009 / This thesis presents the design, analysis and implementation of an eight-element phased array
antenna for wideband X-band applications. The microstrip phased array antenna is designed
using eight quasi-Yagi antennas in a linear configuration and is printed on RT/Duroid
6010LM substrate made by Rogers Corporation. The feeding network entails a uniform
beamforming network as well as a non-uniform -25 dB Dolph-Tschebyscheff beamforming
network, each with and without 45° delay lines, generating a squinted beam 14° from
boresight. Antenna parameters such as gain, radiation patterns and impedance bandwidth
(BW) are investigated in the single element as well as the array environment. Mutual coupling
between the elements in the array is also predicted.
The quasi-Yagi radiator employed as radiating element in the array measured an exceptional
impedance bandwidth (BW) of 50% for a S11 < -10 dB from 6 GHz to 14 GHz, with 3 dB to
5 dB of absolute gain in the frequency range from 8 GHz to 11.5 GHz. The uniform broadside
array measured an impedance BW of 20% over the frequency band and a gain between 9 dB
to 11 dB, whereas the non-uniform broadside array measured a gain of 9 dB to 11 dB and an
impedance BW of 14.5%. Radiation patterns are stable across the X-band. Beam scanning is
illustrated in the E-plane for the uniform array as well as for the non-uniform array.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:cput/oai:localhost:20.500.11838/1100 |
Date | January 2009 |
Creators | Davids, Vernon Pete |
Publisher | Cape Peninsula University of Technology |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Thesis |
Rights | http://creativecommons.org/licenses/by-nc-sa/3.0/za/ |
Page generated in 0.0015 seconds