Controlled-stress, consolidated-undrained triaxial tests with pore pressure measurements were performed on partly saturated bentonite specimens prepared by two different methods of compaction, static and kneading, to give different structural arrangement of the sail particles. The results indicate that the static method employing higher compaction pressure tends to align particles in a more horizontal array as a result of the larger shear strains induced. Samples prepared by the same method of kneading compaction but using different compactive effort of twenty and ten blows with a 20-pound tamper on each of the five layers designated 20-20-5 and 10-20-5 samples respectively show that the less dense 10-20-5 samples have a higher pore pressure response than the 20-20-5 samples as predicted.
Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.113672 |
Date | January 1962 |
Creators | Ho, Kum. H. |
Contributors | Yong, R. (Supervisor) |
Publisher | McGill University |
Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
Language | English |
Detected Language | English |
Type | Electronic Thesis or Dissertation |
Format | application/pdf |
Coverage | Master of Engineering. (Department of Engineering.) |
Rights | All items in eScholarship@McGill are protected by copyright with all rights reserved unless otherwise indicated. |
Relation | alephsysno: NNNNNNNNN, Theses scanned by McGill Library. |
Page generated in 0.0012 seconds