Control of mechatronic systems remain an open problem in control theory despite the research work worldwide in the last decade. Uncertainties in mechatronic systems, which includes faults, and disturbance, will often cause undesired behaviours, affecting the systems performances, may lead to the system failure, or even causing safety issues. Control reconfiguration is an active approach in control systems field. However, controller reconfiguration involves changes in its parameters and structure. System stability might not be able to be guaranteed during the parameters tuning, which might cause more damage to system stability, sometimes may cause safety issues. Due the on-line reconfiguration has a scope, during which the system stability can not be guaranteed. This leads that the systems must be turned off during reconfiguration process. In many industrial areas, such as metallurgy, forging, and manufacturing, shutting down the streamline leads to significant levels of lost productivity and unacceptable economic losses. As alternative to control reconfiguration approach, in this thesis two methods are proposed to deal with faults and disturbances. The first method is the fault matrix observer and the second one is the set-point re-planning. The idea of both methods is to compensate the faults and disturbances which affect the system performances without changing the controller structure or controller parameters.
| Identifer | oai:union.ndltd.org:bl.uk/oai:ethos.bl.uk:740301 |
| Date | January 2017 |
| Creators | Yan, Xiaomo |
| Contributors | Ding, Zhengtao |
| Publisher | University of Manchester |
| Source Sets | Ethos UK |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Source | https://www.research.manchester.ac.uk/portal/en/theses/modelling-and-control-of-advanced-mechatronic-system(5004a687-62a6-4d2c-ac23-83e7cc4598e1).html |
Page generated in 0.0018 seconds