M.Ing. / This study considers improving the azimuth beam steering resolution of the circular Switched Parasitic Array (SPA) antennas (made up of dipoles) by a factor of two or more. In circular SPA antennas, beam steering is conventionally achieved by open-circuiting and shortcircuiting different parasitic elements and usually only one parasitic element is open-circuited at a time. However, such an approach results in low beam steering resolutions especially for the SPA antennas with few parasitic elements. In order to increase the azimuth beam steering resolution for the circular SPA antennas, two beam steering methods are proposed in this research work. In the first method, parasitic elements are open-circuited and short-circuited based on different combinations of the parasitic elements and the possible switch states. The proposed method was first validated by simulation tests using the MATLAB tool and WIPL-D. A prototype of the circular SPA antenna consisting of five elements was then implemented. It is noted that the simulation and measurement results match very well at 2.4 GHz. In order to have at least two combinations (from the first method) with almost similar gain and return loss, another simpler beam steering method was developed. The latter method is based on simultaneously open-circuiting either two or three neighbouring parasitic elements. The performance of the second method was studied through simulations using the circular SPA antenna geometries consisting of five, seven and nine elements. These geometries were first optimized (for gain and input impedance) and then modelled using WIPL-D. It was observed that the two methods double the azimuth beam steering resolution of the circular SPA antennas when compared to the conventional beam steering approaches of open-circuiting one parasitic element at a time. Variations in the structural parameters of the five elements circular SPA antenna at 2.4GHz were also investigated. In this procedure, the effects of variations (also considered as random errors) in the structural parameters (or antenna dimensions) on the performance of the SPA antennas were examined. Firstly, variations in each structural parameter were modelled with other structural parameters fixed as per specifications. Thereafter, effects of combined errors were also investigated. The simulation results demonstrated that variations in the structural parameter can either increase or decrease the gain and input impedance of the SPA antenna depending on the given specifications. The gain and input impedance sensitivities per variations in each structural parameter were computed to determine the degree at which the gain and input impedance can vary for a predefined change (error) in the structural parameter.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:2506 |
| Date | 06 June 2012 |
| Creators | Mofolo, R. O. Mofolo |
| Source Sets | South African National ETD Portal |
| Detected Language | English |
| Type | Thesis |
Page generated in 0.0016 seconds