Made available in DSpace on 2014-12-17T14:57:55Z (GMT). No. of bitstreams: 1
RaimundoJSP.pdf: 1219471 bytes, checksum: d712293aa14f71b340c5cbfd7467bfe4 (MD5)
Previous issue date: 2010-01-12 / This study aimed to investigate the use of cane sugar ashes from small-scale stills of Eun?polis region, state of Bahia, in pottery mass that can be developed as porcelain stoneware. Bahia is the second largest producer of rum distillery in Brazil. In the production of rum is produced residue called bagasse, which is used to generate electricity in Power plants and in the distillery itself, generating ashes as residue, which is played in nature, causing environmental damage. We studied 5 (five) formulations of 0% 10% 20%, 30% and 40% by weight of the ash, without ignition and 3 (three) formulations of 10%, 20% and 30% with gray ash temperature of 1250?C. The formulation at 0% by weight of ash was used for a comparison between the traditional mass of porcelain stoneware and the masses with the addition of ash calcined, replacing feldspar. The percentage by weight of kaolin and of Clay was kept the same, 30%, and all raw materials were derived from the state of Bahia. The samples were made in uniaxial array with dimensions of (60 x 20 x 5) mm and compressed to a pressure of 45 MPa. Assays were performed to characterize the raw by X-ray fluorescence, X-ray diffraction, ATD and ATG and Dilatometric analysis. The samples were sintered at temperatures of 1100?C, 1150?C, 1200?C and 1250?C, for the specimens with the ashes without ash and 1150? C and 1200? C for specimens with the gray level of calcined 60 minutes. and then we made a cooling ramp with the same rate of warming until reach ambient temperature. The sintered bodies were characterized by water absorption, porosity, linear shrinkage, bending strength and XRD of the fracture surface and the results analyzed. It was proven, after results of tests performed, that it is possible to use the ash residue of sugar cane bagasse on ceramic coating with the addition of up to 10% wt of the residue ash / O presente trabalho visa a investigar a utiliza??o da cinza do bala?o da cana de a??car proveniente do alambique artesanal da regi?o de Eunapolis-BA em massa cer?mica que poder? ser aproveitada como um gr?s porcelanato. A Bahia e o segundo estado brasileiro maior produtor de cacha?a de alambique do Brasil. Na produ??o da cacha?a, e produzido res?duo chamado bala?o , sendo este utilizado na gera??o de energia el?trica em usinas termoel?tricas e na pr?pria destilaria, gerando uma cinza como res?duo, que e jogada na natureza, provocando danos ambientais. Foram estudadas 5 (cinco) formula??es de 0% 10%, 20%, 30% e 40% em peso de res?duo de cinza sem calcina??o e 3 (tr?s) formula??es de 10%, 20% e 30% com a cinza calcinada na temperatura de 1250oC. A formula??o em 0% em peso de cinza serviu para uma compara??o entre a massa tradicional do gr?s porcelanato em rela??o as massas com a adi??o de cinza sem calcinar e calcinada, em substitui??o ao feldspato. A percentagem em peso da argila e do caulim foi mantida a mesma, 30%, e todas as mat?rias-primas foram oriundas do estado da Bahia. Os corpos de prova foram confeccionados em matriz uniaxial com as dimens?es de (60 x 20 x 5) mm e compactados a uma press?o de 45 MPa. Foram realizados ensaios para caracteriza??o das mat?rias-primas por fluoresc?ncia de raios X, difra??o de raios X, ATD, ATG, e analise dilatometrica. As amostras foram sinterizadas nas temperaturas de 1100?C, 1150?C, 1200?C e 1250oC para os corpos de prova com a cinza sem calcinar e 1150?C e 1200?C para os corpos de prova com a cinza calcinada com patamar de 60 minutos. Os corpos sinterizados foram caracterizados por absor??o de ?gua, porosidade aparente, retra??o linear, resist?ncia a flex?o e DRX da superf?cie de fratura e os resultados analisados. Ficou comprovado, apos resultado dos ensaios realizados, que e poss?vel a utiliza??o do res?duo da cinza do bala?o da cana de a??car em massas cer?micas de revestimento, com adi??o de ate 10% wt do res?duo da cinza
Identifer | oai:union.ndltd.org:IBICT/oai:repositorio.ufrn.br:123456789/15598 |
Date | 12 January 2010 |
Creators | Paranhos, Raimundo Jorge Santos |
Contributors | CPF:50580396720, http://lattes.cnpq.br/5460040602567184, Santos, Antonio Carlos Pereira, CPF:07253273591, http://lattes.cnpq.br/1167400191007184, Duarte, Luiz Gustavo da Cruz, CPF:42929318520, http://lattes.cnpq.br/1209184692621975, Acchar, Wilson |
Publisher | Universidade Federal do Rio Grande do Norte, Programa de P?s-Gradua??o em Engenharia Mec?nica, UFRN, BR, Tecnologia de Materiais; Projetos Mec?nicos; Termoci?ncias |
Source Sets | IBICT Brazilian ETDs |
Language | Portuguese |
Detected Language | English |
Type | info:eu-repo/semantics/publishedVersion, info:eu-repo/semantics/masterThesis |
Format | application/pdf |
Source | reponame:Repositório Institucional da UFRN, instname:Universidade Federal do Rio Grande do Norte, instacron:UFRN |
Rights | info:eu-repo/semantics/openAccess |
Page generated in 0.0019 seconds