Exoskeletons are rapidly emerging from the realm of science-fiction myth to practical reality in everyday life. Various designs have provided viable means for individuals to regain capabilities that were lost or perform tasks not previously possible by their ability alone. In this research, I propose two novel exoskeletons for walking assistance and heavy load carriage.
The first exoskeleton can be used to provide assistance for walking in various applications such as industrial productivity, rehabilitation, and military or space training. We introduce a design for a lower body wearable device that supports up to 80% of the user's body weight (667 N peak force) with a single actuator on each leg. Its underactuated design directs force through the user's center of mass with a single sprocket-chain driven prismatic actuator on each leg, allowing for natural gait and mobility. The device is optimized for simplicity, ease of assembly, low cost, and weight.
The second design aims to counteract the one of the leading causes of injury in the workplace, repetitive and heavy lifting. The Heavy Lift and Carry Exoskeleton (HeavyLC Exo) is capable of safely lifting and carrying loads up to 36 kg (80 lbs) while minimizing the number of actuators to reduce weight and complexity. The HeavyLC Exo allows the user to direct the object, pause and hold the object steady mid-lift, and follow the natural kinematics of lifting. It is secured to the user with shoulder, chest, and dual thigh straps, along with an adjustable waist belt and overshoe attachment. Powered by two 14.8 V batteries and an off-board air compressor, the HeavyLC Exo has a total of 20 DOF, with 6 actuated DOF and 14 free DOF. The arms use only two actuators each, providing powered lifting and arm retraction/extension, and allowing a wide range of body postures; the legs are powered by single pneumatic actuators on each leg connected to the foot accompanied by a passive spring element to prevent excessive pelvic tilt and leg abduction during swing. The control system requires directional forces from the user at the tool handle of 19 N (4.3 lbf) on average. Current design limitations necessitate the user to provide up to 280 N (62.9 lbf) at the hip during worst load conditions, and future design optimization is proposed. A fully functional prototype of HeavyLC Exo is built, fully tested, and analyzed for improvement. / Master of Science / Exoskeletons, which were once only seen in science fiction, are now becoming a reality in everyday life. Various designs have made it possible for people to do things they couldn't do before or regain abilities they lost. In this research, two new exoskeletons are proposed - one for walking assistance and the other for carrying heavy loads.
The first exoskeleton is designed to help people walk. It supports up to 80 % of the user's body weight with a single actuator on each leg, which directs force through the center of mass, allowing for natural gait and mobility. It's simple, easy to assemble, low-cost, and lightweight, making it useful in various applications such as medical rehabilitation, military or space training, and industrial productivity.
The second exoskeleton is designed to help people lift and carry heavy objects, which is a common cause of workplace injuries. The Heavy Lift and Carry Exoskeleton (HeavyLC Exo) can safely lift and carry objects up to 36 kg (80 lbs) while minimizing the number of actuators to reduce weight and complexity. It's worn by the user using shoulder, chest, and dual thigh straps, along with an adjustable waist belt and overshoe attachment. The exoskeleton is powered by two batteries and an off-board air compressor, and has 20 degrees of freedom, with 6 powered and 14 non-powered, giving it significant flexibility to conform to lifting and walking motions allowing it to function with normal user range of motion. The arms use two actuators each to provide powered lifting and arm retraction/extension, while the legs are powered by single pneumatic actuators on each leg connected to the foot accompanied by a elastic spring element. The control system requires the user to lift and maneuver about 1.9 kg (4.2 lbs) to direct the object. A fully functional prototype has been built, tested, and analyzed for changes in the future.
| Identifer | oai:union.ndltd.org:VTETD/oai:vtechworks.lib.vt.edu:10919/115841 |
| Date | 24 July 2023 |
| Creators | Folta, Nathan Allen |
| Contributors | Mechanical Engineering, Asbeck, Alan T., Losey, Dylan P., Leonessa, Alexander |
| Publisher | Virginia Tech |
| Source Sets | Virginia Tech Theses and Dissertation |
| Language | English |
| Detected Language | English |
| Type | Thesis |
| Format | ETD, application/pdf |
| Rights | In Copyright, http://rightsstatements.org/vocab/InC/1.0/ |
Page generated in 0.0025 seconds