Thesis (MScEng (Electrical and Electronic Engineering))--University of Stellenbosch, 2011. / ENGLISH ABSTRACT: This thesis describes the development of attitude sensors required for the Attitude Determination and
Control System (ADCS) for a Cubesat. The aim is to find the most suitable sensors for use on a small picosatellite
by implementing miniaturised sensors with available commercial-off-the-shelf (COTS) technology.
Specifically, the algorithms, hardware prototypes, software and filters required to create accurate sensors
to determine the 3-axis orientation of a CubeSat are discussed. / AFRIKAANSE OPSOMMING: Hierdie tesis beskryf die ontwikkeling van oriëntasiesensors wat benodig word vir die oriëntasiebepaling
en -beheerstelsel (Engels: ADCS) van ’n CubeSat. Die doelwit is om sensors te vind wat die geskikste is om
in ’n klein picosatelliet te gebruik, deur miniatuursensors met kommersiële maklik verkrygbare tegnologie
(Engels: COTS technology) te implementeer. Daar word in die bespreking veral aandag geskenk aan die
algoritmes, hardewareprototipes, programmatuur en filters wat benodig word om akkurate sensors te
skep wat op hul beurt 3-as oriëntasie van die CubeSat kan bepaal.
| Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:sun/oai:scholar.sun.ac.za:10019.1/6748 |
| Date | 03 1900 |
| Creators | Loubser, Hanco Evert |
| Contributors | Steyn, W. H., University of Stellenbosch. Faculty of Engineering. Dept. of Electrical and Electronic Engineering. |
| Publisher | Stellenbosch : University of Stellenbosch |
| Source Sets | South African National ETD Portal |
| Language | en_ZA |
| Detected Language | English |
| Type | Thesis |
| Format | 105 p. : ill. |
| Rights | University of Stellenbosch |
Page generated in 0.0104 seconds