This master thesis deals with the implementation of the control system for the forming machine used in producing of confectionery forms. The introductory part describes the forming machine from the point of important control elements. The second part is associated with the hardware design of the control automat and description of main functional units on the control PCB, as well as on other PCBs. The following text presents the communication protocol between the control automat and PC and after that there is a description of the CPU firmware. The final section brings the characteristics of the PC application for a connection with the automat.
Identifer | oai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:219692 |
Date | January 2012 |
Creators | Vaško, Jiří |
Contributors | Fojtík, Pavel, Kučera, Pavel |
Publisher | Vysoké učení technické v Brně. Fakulta elektrotechniky a komunikačních technologií |
Source Sets | Czech ETDs |
Language | Czech |
Detected Language | English |
Type | info:eu-repo/semantics/masterThesis |
Rights | info:eu-repo/semantics/restrictedAccess |
Page generated in 0.0012 seconds