Return to search

Výroba držáku vstřikovací trysky / Productin of injector holder

This paper presents a design of the production process for the clamping nut by cold extrusion. The nut, which is made of material ČSN 12 050, is used to clamp the injection nozzle to the injection system. Subsequently different variants of production were processed, from which the variant B was chosen. For slug a rod with diameter size of 24 mm with toleration f9 made by the company Ferona a. s was chosen. Calculations of process parameters were made for this variant. Based on the parameters the automatic forming machine TPD 630 with nominal force of 6 000 kN was chosen. For the selected machine, operational tools were designed for each forming operation, whose geometry is shown in the drawing documentation. Based on the technical and economical evaluation, the final price of the formed part was set at CZK 18,48.

Identiferoai:union.ndltd.org:nusl.cz/oai:invenio.nusl.cz:417134
Date January 2020
CreatorsŠtys, Michal
ContributorsŘiháček, Jan, Císařová, Michaela
PublisherVysoké učení technické v Brně. Fakulta strojního inženýrství
Source SetsCzech ETDs
LanguageCzech
Detected LanguageEnglish
Typeinfo:eu-repo/semantics/masterThesis
Rightsinfo:eu-repo/semantics/restrictedAccess

Page generated in 0.0015 seconds