M.Ing. (Electrical And Electronic Engineering) / The feasibility of various alternative methods for obtaining air conditioning in internal combustion vehicles is examined from literature studies. It is concluded that adsorption cooling which utilises the hot exhaust gases appears to be the most promising and the combination zeolite-water is chosen for further research. A synopsis of the state of the art as documented in the literature is given and typical unresolved problems are identified. A description of the basics of adsorption cooling and the properties ofthe material zeolite is elaborated upon. The requirements for a design to be successful is explained. A finite difference computer spreadsheet model is developed to aid in the calculation ofthe heat transfer process that is necessarily part ofthe sorption processes. Laboratory tests on three sorbers of proprietary design are described and the test methods are refined to the point where satisfactory results are obtained. It is concluded from the tests and computer simulations that adsorption cooling as an alternative method of vehicle air conditioning appears a viable proposition, but that further research is required.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:uj/uj:3623 |
Date | 05 February 2014 |
Creators | Meyer, Cornelis Floris |
Source Sets | South African National ETD Portal |
Detected Language | English |
Type | Thesis |
Rights | University of Johannesburg |
Page generated in 0.0021 seconds