The purpose of this thesis is the construction of a test bench for the assessment of the NVH behaviour of a newly manufactured VW Polo 5. This will be done in collaboration with Volkswagen South Africa. Firstly, in order to gain a better understanding of the requirements such a test bench has to fulfill, the VW Polo, the guidelines prescribed by VW as well as the actual testing procedure implemented by VW Uitenhage will be analysed. Thereafter, the main section of the thesis will deal with the construction of the test bench. As agreed upon with Volkswagen Uitenhage, a test bench will be built during the course of the studies. This test bench will allow stimulation in low frequency as well as high frequency ranges and in addition to that, a second version of the test bench with optimised costing will be derived from the first one. The second model will only allow stimulation in high frequency ranges. During the thesis, a version of the test bench, the RTB-HC, has been developed which enables the stimulation of the high and low frequencies. In addition, a cost optimized version was developed. This version will be referred as RTB-LC. This version allows only a high frequency excitation.
Identifer | oai:union.ndltd.org:netd.ac.za/oai:union.ndltd.org:nmmu/vital:29728 |
Date | January 2015 |
Creators | Raffler, Oliver |
Publisher | Nelson Mandela Metropolitan University, Faculty of Engineering, the Built Envirnoment and Information Technology |
Source Sets | South African National ETD Portal |
Language | English |
Detected Language | English |
Type | Thesis, Masters, MEngineering |
Format | xix, 295 pages, pdf |
Rights | Nelson Mandela Metropolitan University |
Page generated in 0.0016 seconds