Return to search

Validation of the physical effect implementation in a simulation model for the cylinder block/valve plate contact supported by experimental investigations

Overall losses in swash plate type axial piston machines are mainly defined by three tribological interfaces. These are swash plate/slipper, piston/cylinder and cylinder block/valve plate. Within a research project, funded by the German Research Foundation, a combined approach of experimental research and simulation is chosen to acquire further knowledge on the cylinder block/valve plate contact. The experimental investigations focus on the friction torque within the contact and the measurement of the cylinder block movement in all six degrees of freedom. Simultaneously a simulation model is created focusing on the main physical effects. By considering the results of the experimental investigations significant physical effects for the simulation model are assessed. Within this paper a first comparison between experimental results and the simulation is presented, showing that for a qualitative match the implemented effects (mainly the fluid film, solid body movement, solid body contact, surface deformation) are sufficient to model the general behaviour of theinvestigated pump.

Identiferoai:union.ndltd.org:DRESDEN/oai:qucosa:de:qucosa:29309
Date January 2016
CreatorsWegner, Stephan, Löschner, Fabian, Gels, Stefan, Murrenhoff, Hubertus
ContributorsDresdner Verein zur Förderung der Fluidtechnik e. V.
PublisherTechnische Universität Dresden
Source SetsHochschulschriftenserver (HSSS) der SLUB Dresden
LanguageEnglish
Detected LanguageEnglish
Typedoc-type:conferenceObject, info:eu-repo/semantics/conferenceObject, doc-type:Text
Source10th International Fluid Power Conference (10. IFK) March 8 - 10, 2016, Vol. 1, pp. 269-282
Rightsinfo:eu-repo/semantics/openAccess
Relationurn:nbn:de:bsz:14-qucosa-196933, qucosa:29237

Page generated in 0.002 seconds