This thesis presents the results of an investigation of bearing failure at a loaded hole in carbon fibre composite laminates. The investigation included finite element analysis and a program of experimental testing for quasi-isotropic laminates, uni-directional laminates and laminates with fibres steered along predefined trajectories. The investigation formed part of a research program in the Cooperative Research Centre for Advanced Composite Structures Ltd (CRC-ACS) support by the Office of Naval Research from the United States. Work in progress in the CRC includes research defined in this thesis including the addition of nano-particles to the resin to improve the bearing strength. The literature survey undertaken in this thesis identified that the micro-buckling theory proposed by Professor C.T. Sun from Purdue University, Indiana USA, is the best analysis procedure for initial bearing failure in pin-loaded laminates. This failure theory has therefore been implemented in a Fortran program using the results from a finite element analysis for the nonlinear contact problem of a pin bearing on a hole in a composite laminate. The finite element analysis is executed using the commercial finite element system MSC.MARC. The numerical predictions have been validated by a test of progressive failure with the aid of an acoustic emission monitoring system. The acoustic emission parametric and frequency analysis is performed using the acoustic emission software Vallen Systeme. Fast fourier transformation of the waveform have been achieved to distinguish and identify microfailure mode. Failure mechanisms have been verified by post-mortem microstructural examination. There are 3 failure mechanisms associated with bearing failure in carbon fibre reinforced epoxy composite, the first is fibre matrix interfacial failure, followed by fibre fracture, and subsequently matrix splitting. The application of AE technique has been applied successfully to characterise the development of failure.
| Identifer | oai:union.ndltd.org:ADTP/187294 |
| Date | January 2007 |
| Creators | Ujjin, Rapee, Mechanical & Manufacturing Engineering, Faculty of Engineering, UNSW |
| Publisher | Awarded by:University of New South Wales. School of Mechanical and Manufacturing Engineering |
| Source Sets | Australiasian Digital Theses Program |
| Language | English |
| Detected Language | English |
| Rights | Copyright Rapee Ujjin, http://unsworks.unsw.edu.au/copyright |
Page generated in 0.0016 seconds