A commercial electron dose calculation software (Eclipse TM) implementation based on the Macro Monte Carlo algorithm has been introduced. Eclipse™ initial configurations were performed for all available electron beam energies 6, 9, 12, 16, and 20 MeV. We evaluated the electron Monte Carlo (eMC) module of the Eclipse™ using a verification data set comprised of depth dose curves, profiles, Relative Output Factors (ROF), and 2-0 dose distributions in the transverse plane in a homogeneous phantom. The verification data set was comprised of measurements performed for combinations of 6, 9, 12, 16, and 20 MeV beam energies with five standard field sizes and thirteen irregularly shaped fields under three phantom setups. The phantom setups were normal beam incidence at source-to-surface distance (SSO) = 100cm, normal incidence with extended SSO=11 Ocm, and oblique incidence with extended SSO=11 Ocm. Calculations were performed in a digital phantom with the maximum number of particles accepted by Eclipse ™ with a grid spacing that was no larger than approximately one-tenth the distal falloff distance of the electron depth dose curve from 80% to 20% of the maximum dose. Overall, the agreement between the calculated dose distributions and measured on es was good for fields larger than 2 cm to better than 3% dose difference and 3 mm distance-to-agreement.
| Identifer | oai:union.ndltd.org:LACETR/oai:collectionscanada.gc.ca:QMM.101700 |
| Date | January 2006 |
| Creators | Asiev, Krum. |
| Publisher | McGill University |
| Source Sets | Library and Archives Canada ETDs Repository / Centre d'archives des thèses électroniques de Bibliothèque et Archives Canada |
| Language | English |
| Detected Language | English |
| Type | Electronic Thesis or Dissertation |
| Format | application/pdf |
| Coverage | Master of Science (Department of Medical Radiation Physics.) |
| Rights | © Krum Asiev, 2006 |
| Relation | alephsysno: 002585938, proquestno: AAIMR32813, Theses scanned by UMI/ProQuest. |
Page generated in 0.0025 seconds