Return to search

NANOCONTROLLER PROGRAM OPTIMIZATION USING ITE DAGS

Kentucky Architecture nanocontrollers employ a bit-serial SIMD-parallel hardware design to execute MIMD control programs. A MIMD program is transformed into equivalent SIMD code by a process called Meta-State Conversion (MSC), which makes heavy use of enable masking to distinguish which code should be executed by each processing element. Both the bit-serial operations and the enable masking imposed on them are expressed in terms of if-then-else (ITE) operations implemented by a 1-of-2 multiplexor, greatly simplifying the hardware. However, it takes a lot of ITEs to implement even a small program fragment. Traditionally, bit-serial SIMD machines had been programmed by expanding a fixed bitserial pattern for each word-level operation. Instead, nanocontrollers can make use of the fact that ITEs are equivalent to the operations in Binary Decision Diagrams (BDDs), and can apply BDD analysis to optimize the ITEs. This thesis proposes and experimentally evaluates a number of techniques for minimizing the complexity of the BDDs, primarily by manipulating normalization ordering constraints. The best method found is a new approach in which a simple set of optimization transformations is followed by normalization using an ordering determined by a Genetic Algorithm (GA).

Identiferoai:union.ndltd.org:uky.edu/oai:uknowledge.uky.edu:gradschool_theses-1482
Date01 January 2007
CreatorsRajachidambaram, Sarojini Priyadarshini
PublisherUKnowledge
Source SetsUniversity of Kentucky
Detected LanguageEnglish
Typetext
Formatapplication/pdf
SourceUniversity of Kentucky Master's Theses

Page generated in 0.002 seconds